ASUS Router Redirect – Fix Amazonaws Issue

TL;DR

Your ASUS RT-AC68 router is being redirected to an Amazonaws page, likely due to malware or a compromised DNS setting. This guide will help you reset your router, check for malicious software, and secure your network.

Steps to Fix the Redirect

1. Factory Reset Your Router
   • Locate the reset button on your ASUS RT-AC68. It’s usually a small hole near the power port.
   • Press and hold the reset button for 10-15 seconds while the router is powered on.
   • Release the button when the power light starts to blink. The router will reboot with its factory settings. Warning: This will erase all your custom settings, including Wi-Fi passwords!
2. Access Your Router’s Web Interface
   • After the reset, connect to the router using a wired connection (Ethernet cable).
   • Open a web browser and type 192.168.1.1 into the address bar. If this doesn’t work, try router.asus.com.
   • You’ll be prompted to set up a new administrator password. Choose a strong, unique password.
3. Update Router Firmware
   • Log in to your router’s web interface.
   • Navigate to the ‘Firmware Upgrade’ section (usually under ‘Administration’ or ‘System’).
   • Check for updates and install the latest firmware version. This often includes security patches.
4. Check DNS Settings
   • Log in to your router’s web interface.
   • Go to ‘LAN’ settings, then ‘DNS Server’.
   • Ensure you are using a reliable DNS server. Consider these options:
     • Google Public DNS: 8.8.8.8 and 8.8.4.4
     • Cloudflare DNS: 1.1.1.1 and 1.0.0.1
     • ASUS Default: Obtain DNS Automatically (DHCP)
5. Review Connected Devices
   • Log in to your router’s web interface.
   • Navigate to the ‘Network Map’ or ‘Client List’.
   • Look for any unfamiliar devices connected to your network. Disconnect them immediately.
6. Scan Your Devices for Malware
   • Run a full system scan on all computers, smartphones, and tablets connected to your network using reputable antivirus software.
   • Consider using a dedicated malware removal tool if you suspect a deep infection.
7. Enable Router Security Features
   • Log in to your router’s web interface.
   • Enable the firewall (usually enabled by default).
   • Enable WPA2 or WPA3 encryption for your Wi-Fi network with a strong password.
   • Consider enabling MAC address filtering if you have a small number of devices that need access to your network.

If the problem persists after following these steps, it’s possible your router has been severely compromised and may require more advanced troubleshooting or replacement.